The DEWALT DWAN2190 is a medium 8-compartment small parts organizer for tradespeople who need to keep loose bits, nails, nuts and bolts sorted. It is part of the Tough Case + connectable storage system. Going by the description, it is a sensible pick if you already run DEWALT cases.
The clear lid lets you see contents at a glance, which saves time when you are hunting for one fastener. A clip latch holds it shut and the dividers are customizable. It also fits inside the small and medium Tough Case, sold separately, so check what you own first.
Quick verdict: A practical small parts case for DEWALT Tough Case users who want to see and sort hardware quickly.
- Best for: Organizing loose bits, nails, nuts and bolts inside a Tough Case setup.
- Skip it if: You do not use Tough Case cases, since the connectable and fit-inside features are the point.
- Key spec: Clear lid with a clip latch and customizable dividers across 8 compartments.
DWAN2190 Key Specs and What Comes in the Box

The size is the most useful fact. This is the small bulk storage formatand it fits inside the small and medium Tough Case, which is sold separately. If you already run that system, it slots right in. If you don’t, it is still a standalone box.
- Compartments: 8, with customizable dividers so you set the layout.
- Bit-bar: patented design for easy bit removal and customizable placement.
- Lid: clear, so you can see the contents at a glance.
- Closure: clip latch for secure closing.
- System: part of the connectable Tough Case + line.
The description points to loose bits, nails, nuts and bolts. Eight compartments with movable dividers suit that kind of mixed hardware. The clear lid saves you from opening three boxes to find one fastener.
On small organizers the latch and hinge are what I check first, since a popped lid in a tool bag means a mess. The listing only says clip latch, so I can’t speak to how it holds up. It also doesn’t list any bits or hardware, so plan on filling it yourself.
How Well Do the Customizable Dividers Sort Small Parts?

The customizable dividers across the 8 compartments are what make this organizer useful for loose hardware. Screws, nails, nuts and bolts never come in one size, so being able to change the layout beats fixed bins. The description lists loose bits, nails, nuts and bolts as the intended use.
The description does not say how the dividers lock in, so that is where I would look first. In this class of organizer, small parts get into the wrong bin when a divider sits loose or leaves a gap. Here is what I would check:
- Divider fit: it should sit snug with no gap that lets small screws slip into the next bin.
- Clear lid: you can see the sort at a glance, so you can tell which bin is low without opening the case.
- Clip latch: it keeps the lid closed so a sorted layout stays sorted when the box gets moved.
My approach would be to sort by type first and size second. Keep the tiny fasteners in the smaller bins and give nails or bolts the wider ones. The case is also sized to fit inside the small and medium Tough Case (sold separately), which helps if you already run that system.
Build Quality and Jobsite Durability of the DEWALT Case

The clip latch is the most useful build detail here. On small parts organizers, the latch and lid are what tend to fail first, because these boxes get tossed in truck bins, dropped and stacked under heavier gear. A clip latch gives a positive closure, so loose screws, nuts and bits stay put when the box moves.
- Clip latch: secures the lid closed.
- Clear lid: lets you see the contents at a glance without opening the box.
- Dividers: customizable, so you can size compartments to the hardware you carry.
- Nesting size: the small bulk storage size fits inside the small and medium Tough Case, sold separately.
- Connectable system: part of the Tough Case + line, built to use storage space efficiently.
The description does not cover hinge design, plastic thickness, impact rating or whether the lid seals against dust and moisture. I would not treat this as a weatherproof boxand I would not trust any organizer in this class to survive a hard drop fully loaded. Where it makes sense is riding inside a larger Tough Case, where the outer shell takes the abuse. Check that the latch snaps shut with a firm click and that the lid sits flat before you load it with small hardware.
Does It Fit Your Truck Storage and Other Toolboxes?

The key fact is that this small bulk storage size fits inside the small and medium Tough Caseand those cases are sold separately. That makes it a drop-in organizer for loose bits, nails, nuts and bolts inside a bigger DEWALT case. If you already run that system, this is the piece that keeps small hardware from rolling around.
The description gives no dimensions, so I can’t tell you how it sits in a truck drawer, a van shelf or another brand’s toolbox. Measure your space before you buy. Don’t assume that fitting one system means it will drop into a different one.
- Fits inside: the small and medium Tough Case (sold separately)
- System: connectable accessory storage meant to optimize storage space
- Latch: clip latch for secure closing
- Lid: clear, so you can see the contents at a glance
On a service truck, space is tight and the clear lid helps. You can spot a fitting or screw size without opening three boxes. Check that the clip latch holds shut once the case is loaded, since a weak latch spills hardware in transit.
DEWALT vs Generic Plastic Small Parts Organizers

The biggest difference is that this organizer is part of a system. It is built to fit inside the small and medium Tough Case, which is sold separately. A generic plastic box is a standalone container. It holds parts, but it will not nest into a case or connect to anything.
Here is where the DEWALT design has the edge on paper:
- Patented bit-bar design for easy bit removal and customizable placement
- Clear lid so you can see the contents at a glance
- Clip latch for secure closing
- Eight compartments with customizable dividers
- Connectable accessory storage to make better use of space
Cheap organizers tend to fail at the latch and the hinge. A weak snap lid pops open in a bin and you end up sorting screws off the floor of the truck. A clip latch is the right feature to look for, but I can’t tell you how this one holds up over time. That depends on the plastic and the hinge.
If you just need a cheap box for a drawer, a generic one does the job. If your bits and fasteners already ride in a Tough Case, the fit and the bit-bar make this one the more useful choice.
Best Jobs and Users for This Parts Organizer

This organizer suits anyone who carries loose small hardware and driver bits and wants them sorted by size. The description names bits, nails, nuts and bolts as the intended contents. In HVAC and refrigeration work, that is the stuff that usually ends up rattling around in a bucket or a pouch.
The clear lid lets you check what is inside without opening it. The clip latch keeps the lid closed while the box rides in a truck or van. Both matter when you are hunting for the right fastener and the clock is running.
- Techs and installers who sort screws, nuts and bolts by size
- Drivers who want bits kept in the bit-bar for easy removal and customizable placement
- Pros who already own a small or medium Tough Case, since this size fits inside those (cases sold separately)
- Anyone building out the connectable Tough Case + system
This is a small parts box, not a tool carrier. Keep meters, gauges and larger fittings somewhere else and let this one handle the fasteners and bits.
Pros & Cons

Pros and Cons
| Pros | Cons |
|---|---|
| Clear lid shows contents at a glance, so no digging through lids. | Fits inside small and medium Tough Case onlyand those are sold separately. |
| Patented bit-bar design makes bit removal easy with customizable placement. | Connectable system pushes you toward Tough Case + and locks you into one line. |
| Clip latch closes the case securely for carrying loose small parts. | Description lists 8 compartments only, with no capacity or size given. |
| Good for loose bits, nails, nuts and bolts in one small case. | Description says nothing about material thickness, so durability is unconfirmed. |
| Connectable design helps use storage space better across a kit. | Bit-bar design is built for bits, so bulk hardware may use space less efficiently. |
Skip it if: you don’t already run DEWALT Tough Case storageor you need a large organizer for heavy hardware and full-size fasteners.
Frequently Asked Questions

Does the DEWALT DWAN2190 fit inside the Tough Case?
Yes, the DEWALT DWAN2190 is listed as fitting inside the small and medium Tough Case. Those cases are sold separately, so you need to buy them on their own. The description calls it a small bulk storage size. Check the listing for exact case compatibility before you order.
Is the DEWALT DWAN2190 good for screws, nuts and bolts?
Yes, the description names loose bits, nails, nuts and bolts as ideal uses. That covers the small hardware most techs end up sorting. The title lists eight compartments, so you can split sizes apart. The description gives no weight rating, so check the listing before you load it with heavy hardware.
Does the DWAN2190 organizer have a clear lid and a latch?
Yes, it has a clear lid and a clip latch. The lid lets you see the contents at a glance, so you can find the right spot without opening everything. The clip latch is there for secure closing. The description does not say how the latch holds up over time, so check reviews and the listing.
Can you customize the compartments on this DEWALT small parts organizer?
Yes, the title and description say it comes with customizable dividers. The title lists eight compartments in the medium size. Dividers let you change the layout to fit your parts. The description does not say how many dividers are in the box or how they lock in, so check the listing for those details.
What is the bit-bar design on the DEWALT Tough Case + organizer?
The bit-bar is a patented design that allows easy removal of bits and customizable placement, per the description. It is meant to keep bits organized and easy to pull out. The description does not say which bit sizes it holds or whether any bits are included, so check the listing before you buy.
Final Verdict

This is a small parts organizerand it should be judged as one. The clear lid shows the contents at a glance and the clip latch closes it up. The dividers are customizable, so you can set up the eight compartments for screws, nuts, bolts, nails or loose bits. The patented bit-bar design helps if you carry bits. The description says nothing about long term latch durabilityand latches are where cases in this class usually fail. Check that before you buy.
It suits a homeowner or serious DIYer who wants loose hardware sorted. It also suits a tech who already runs Tough Case boxes, since it fits inside the small and medium Tough Case, sold separately. Without that system, you lose the main advantage. If you sort large fasteners or fittings, look at a bigger case, because this is small bulk storage. Pros who need a full toolbox should skip it.